Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Mid-City
If you’ve noticed dust streaks around a register, a room that never cools right, or a utility bill that keeps climbing, your ducts are probably leaking. We handle duct repair and sealing for homeowners and property managers throughout Mid-City, from the blocks near Wilshire to the duplexes off Pico. Our technicians have up to 11 years of experience, and they know the housing here: 1920s bungalows, Spanish Revival homes, and postwar duplexes with ductwork that was never built for modern forced-air pressures. One flat price per system, agreed before any work starts, with before-and-after photos so you can see what was done. Call (877) 492-0146 for a free estimate.

Why Mid-City Homeowners Call Air Duct Cleaning Silver Lake for Duct Repair & Sealing
Mid-City is a patchwork of housing that most duct companies treat like every other part of Los Angeles, and that’s where jobs go wrong. We work the area regularly, so we arrive already knowing that a 1940s home off Venice Boulevard may have original galvanized ducts wrapped at the joints, while a 1960s stucco box a few streets over may have a retrofitted central air system bolted onto an old gravity furnace. That difference changes the entire approach.
We’re a full-cycle indoor air quality specialist, not a vacuum-and-go outfit. That means we diagnose, clean, repair, and seal the system rather than cleaning around a leak that will pull dust right back in. Our technicians use Rotobrush rotary brush systems and Nikro agitation tools under Abatement Technologies containment, so dislodged contaminants get filtered instead of recirculating through your living space. For Mid-City homeowners, that protocol matters more than speed. We’d rather do it properly once.
Response time to Mid-City is short, and the estimate is free. We don’t just clean – we seal, repair, and treat.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Mid-City
Older Mid-City housing means duct repair here is less about maintenance and more about stabilization. Here’s what that looks like in practice.
Duct Sealing
Sealing is the highest-value fix in most Mid-City homes, and it’s usually the first thing we recommend when a system has original sheet-metal runs. In pre-1978 houses, that often means carefully encapsulating aging joints rather than aggressively brushing them, especially where insulation is wrapped around metal. We seal accessible joints with mastic and verify airflow at the air handler when we’re done. A sealed system holds pressure, which means rooms cool evenly and the blower stops working overtime.

Flex Duct Repair
Disconnected and crushed flex duct is one of the most common problems we find in Mid-City attics and crawlspaces, particularly in homes that had central air added during a later remodel. Failed connections dump conditioned air into the attic instead of your bedrooms. We repair or replace damaged runs and re-support them so they don’t sag or pinch. Where an unpermitted addition has undocumented branch runs, we trace them and get them properly connected or capped.

Metal Duct Repair
Original galvanized ductwork in prewar Mid-City homes develops pinhole leaks and separated joints you can’t see from the living room. Retrofitted systems on old gravity furnaces also tend to run undersized, which raises static pressure and stresses every seam. We repair the metal, reseal the joints, and check that the duct sizing actually matches what the air handler is pushing.

Duct Insulation
Many Mid-City ducts run uninsulated through hot attics, so cooled air warms up before it reaches the room. Adding insulation to those runs cuts that loss and reduces condensation on cold metal. It’s a small job with a measurable effect on comfort in the back bedrooms of a long, narrow bungalow.
Trusted Brands We Service in Mid-City
We work with the equipment and products that hold up in older housing. Rotobrush rotary systems handle mechanical cleaning inside galvanized and flex runs without damaging aged metal. Nikro negative-pressure and agitation tools let us pull debris out under controlled conditions rather than blowing it around. Abatement Technologies filtration keeps that debris contained while we work, and where a homeowner wants better filtration afterward, we install Honeywell and Aprilaire components during the same visit. We don’t claim to stock parts locally; we source what the job needs and schedule the return quickly. One visit covers cleaning, any needed repairs, and finishing.

Common Duct Repair & Sealing Problems We See in Mid-City Homes
- Pinhole leaks in original galvanized duct. Prewar Mid-City homes often have sheet-metal runs with decades of small failures hidden above ceilings or in crawlspaces. These leak steadily and quietly, and they never show up until the cooling bill does.
- Mismatched sizing after a central air retrofit. When central air gets attached to an old gravity furnace, the original duct was never sized for the new blower’s static pressure. Every seam and joint gets stressed, and the seals fail faster.
- Undocumented branch runs from additions. Unpermitted additions are common in Mid-City, and they often leave branch ducts that bypass sealing entirely and vent conditioned air into walls or attics. Tracing them takes patience. Fixing them takes a plan.
- Dust and soot pulled in during Santa Ana winds. The I-10 along Mid-City’s southern edge and the springtime Santa Ana winds drive fine dust into return ducts. That load accelerates wear on flex connections and coats every surface inside the system.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Mid-City, CA
Pricing is per system, not per vent, and the written estimate sets the final price. A typical duct sealing job in Mid-City runs $450-$900 for a single system, depending on how many accessible joints need mastic and how much of the run can be reached. Flex duct repair or replacement of a few damaged runs typically runs $300-$700. Metal duct repair on original galvanized runs, including resealing failed joints, usually lands between $400-$850. Adding insulation to uninsulated attic runs runs roughly $350-$750 depending on length and access.
What moves the number most is access and the number of systems. That’s where larger Mid-City homes deserve extra attention. A house with three systems needs three separate estimates and three separate records, and lumping them into one price hides which system got what work. We price each system on its own and photograph each one.
We Also Serve Cities Near Mid-City
We work throughout Mid-City and the surrounding neighborhoods, including Koreatown, Hollywood, West Hollywood, and Silver Lake. If you’re just outside the boundary, call and we’ll confirm coverage before scheduling. Our duct repair & sealing team handles the same protocol across these areas, adapted to the housing stock on each block.
Serving Mid-City, CA – Our Local Coverage Area
We serve Mid-City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Mid-City
Sealing addresses the root cause; cleaning only addresses the symptom. In prewar Mid-City homes, original galvanized ducts have pinhole leaks and disconnected joints that pull dust, soot, and attic air into the system continuously. Cleaning a leaky duct just means it recontaminates within months. Sealing first means the cleaning actually holds. Call (877) 492-0146 for an exact quote – estimates are free.
They encapsulate rather than disturb, following RRP-safe practices. Many Mid-City homes built before 1978 have joints wrapped with material that shouldn’t be abraded or aggressively brushed. The right approach is to seal over the wrap and stabilize it, then document what was found and how it was handled. Aggressive cleaning on those joints is exactly what should not happen. Ask any contractor how they plan to treat wrapped joints before they start.
You should get per-system records, not one summary for the whole house. For each system, expect before-and-after photos of the joints and runs, a note on what was sealed and what was replaced, and airflow readings taken at the air handler. In a house with three systems, three sets of records is the standard. If a contractor can’t tell you which system got which work, the paperwork isn’t finished. Call (877) 492-0146 to set up an estimate.
In most cases, yes. Backyard duplexes and unpermitted additions are everywhere in Mid-City, and the branch runs serving them are often reachable through the attic or crawlspace. Where a run is buried inside a finished wall, we seal what’s accessible and document the limits clearly rather than promising a fix that would require demolition. The estimate will tell you exactly what’s reachable before any work begins.
Springtime Santa Ana winds push fine dust and freeway soot into return ducts, so sealing before that season pays off most. A system with failed joints pulls that dust straight into the living space all season. Sealing and repairing those joints in advance keeps the load out. If you’re heading into wind season with visible dust streaks at the registers, that’s the signal to book an inspection. Call (877) 492-0146 for a free estimate.
Schedule Your Duct Repair & Sealing in Mid-City
If your Mid-City home has original metal ducts, disconnected flex runs, or a retrofitted system that never quite worked, we can look at it and give you a straight answer on what needs sealing and what can wait. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts so you can verify work you can’t otherwise see. Call (877) 492-0146 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Silver Lake.