Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Silver Lake?
Duct repair and sealing in Silver Lake typically runs $350 to $1,200 for most homes, with simple joint-and-seam sealing at the low end and partial duct replacement or major leak repair at the high end. A single small leak repair often lands around $200 to $450, while a full accessible-system seal on a larger Silver Lake hillside house can reach $1,800. We give written, per-job estimates before any work begins, so the final price is set by the estimate, not by a phone quote.
Silver Lake’s housing stock is a big part of why those ranges spread so wide. The neighborhood mixes 1920s bungalows with mid-century courtyard apartments and newer hillside builds, and the ductwork inside them ranges from bare galvanized trunks in a crawlspace to flex runs snaked through tight attic space. Older systems in Silver Lake tend to have more disconnected joints, crushed flex, and taped seams that have dried out and let go. When we inspect, that physical difference – not the square footage alone – is what moves the price.
What we don’t do is clean around a leak and call it done. We don’t just clean – we seal, repair, and treat. If you suspect your ducts are leaking, losing cooled air, or pulling dust and attic air into your living room, the repair side is where the real fix lives. Call (877) 492-0146 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical duct repair and sealing in Silver Lake: $350 – $1,200 for most homes.
- Small leak repairs: $200 – $450. Full accessible-system sealing: $1,000 – $1,800.
- Cost is driven by duct condition, accessibility, and how many leaks we find – not by a flat rate.
- Every job is quoted in writing before work starts. Estimates are free.
- We can clean, repair, seal, and sanitize in one visit with professional-grade Rotobrush and Nikro equipment plus Abatement Technologies containment.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the individual line items break down for the Silver Lake market in 2026. These are typical ranges for residential work; a written estimate after inspection sets your actual price.
| Service | Typical Range | What It Covers |
|---|---|---|
| Single leak or joint repair | $200 – $450 | Locating and sealing one disconnected or failed joint, including labor and mastic or foil tape |
| Section of duct replacement (flex or rigid) | $300 – $700 | Removing crushed or torn duct and installing new flex or rigid run |
| Sealing accessible joints and seams (mastic + tape) | $350 – $900 | Sealing visible leaks at registers, plenums, and trunk connections |
| Full accessible-system seal | $1,000 – $1,800 | Sealing every reachable joint across the trunk and branch runs |
| Register and boot repair | $150 – $400 | Reseating loose boots, replacing damaged registers, sealing gaps at the wall or floor |
| Duct cleaning before repair | $300 – $600 | Mechanical cleaning so sealing isn’t done over debris |
| Air sanitizing after repair | $200 – $500 | Treatment for mold spores, bacteria, and odors using Guardsman products |
| Filtration or humidity upgrade (Honeywell, Aprilaire) | $400 – $1,200 | Installing upgraded filtration or humidity control during the same visit |
What pushes a job toward the top of those ranges? Mostly the number of leaks and how easy they are to reach. A Silver Lake bungalow with a low crawlspace and a single failed joint is a different job from a hillside house where flex runs are buried behind finished walls and a long trunk has come apart at three seams. Duct material matters too: rigid galvanized is more labor to seal at every fitting, while flex is quicker to repair but fails more often. If we find crushed flex behind a register, that section gets replaced, not taped over.
We always clean before we seal. Sealing a dirty system traps debris and pushes it back into the living space – the opposite of what you want. That’s why we run mechanical cleaning with Rotobrush and Nikro equipment first, contain the workspace with Abatement Technologies filtration, then move to duct repair & sealing on the clean system. One visit covers cleaning, any needed repairs, and sanitizing – no second appointments, no unanswered problems.
What Affects Duct Repair & Sealing Pricing in Silver Lake
- Age and condition of the ductwork. Silver Lake’s older bungalows and mid-century apartments often have duct systems that have been patched, extended, or rerouted over the years. More history means more leaks to find and seal, and more time on the job.
- Accessibility. Attic and crawlspace access varies wildly from house to house in Silver Lake. A wide, clear attic hatch means faster work; a tight crawlspace under a hillside build means slower work. We quote based on what we actually see.
- Number of leaks. One failed joint is a small job. A trunk that’s separated at several branch connections is a bigger one. The count matters more than the square footage.
- Duct material. Rigid galvanized ducts seal well but have many fittings to address. Flex duct is easier to repair but more prone to crushing and tearing. Mixed systems cost a bit more to work on because the sealing approach differs by section.
- Whether cleaning is needed first. If the system hasn’t been cleaned in a while, cleaning comes before sealing. We bake that into the same estimate so there are no surprises.
- Whether you add filtration or sanitizing. Honeywell and Aprilaire upgrades, or Guardsman sanitizing, add to the total but let you solve multiple air quality issues in one visit rather than scheduling a second.
One more factor specific to Silver Lake: the hillside geography. Houses on sloped lots often have duct runs that step down or wrap around tight corners, which means more fittings and more places for a joint to fail. Flat-lot bungalows tend to have straighter, simpler runs. Both are common here, and both show up in the price.
How to Save on Duct Repair & Sealing
The single biggest way to save is to catch leaks early. A small disconnected joint that gets sealed for a couple hundred dollars today can become a crushed run and a bigger repair if it’s ignored for a season. If you’re already noticing uneven room temperatures or higher energy bills, that’s the moment to have the system checked.
- Bundle cleaning, sealing, and sanitizing in one visit. Cleaning first, then sealing, then treating means one dispatch instead of three. We quote the whole job together, and the combined price is lower than scheduling each service separately.
- Ask for the written estimate before work starts. We provide free estimates, and the written number is what you pay. There’s no guesswork and no add-on at the end.
- Address filtration at the same time. If you’re going to upgrade to a Honeywell or Aprilaire filter or humidity control, doing it while the technician is already on the system avoids a second visit and a second cost.
- Don’t skip the repair to save on cleaning. Cleaning a leaking system just means the dust comes back through the same gaps. Fixing the leaks is what makes a cleaning last.
- Get a baseline inspection before problems get expensive. A free estimate now can catch a failing joint before it turns into a full section replacement.
To get your own numbers, call (877) 492-0146. Estimates are free and we’ll walk you through what we find. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Silver Lake?
Most duct repair and sealing jobs in Silver Lake fall between $350 and $1,200, with small leak repairs around $200 – $450 and full accessible-system sealing reaching $1,000 – $1,800. Call (877) 492-0146 for an exact quote – estimates are free.
Is it cheaper to repair or replace ductwork?
Repair is almost always cheaper for a system in decent shape – sealing leaks typically runs $350 – $1,200, while replacing large sections can push well past that. We only recommend replacement when a run is crushed or too damaged to seal. Call (877) 492-0146 and we’ll tell you which applies to your system.
Can you come today?
Yes – same-day service is often available. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (877) 492-0146 to get on the schedule, and a free estimate comes first.
Do you offer free estimates on duct repair and sealing?
Yes, estimates are free. We inspect the system, identify the leaks, and give you a written per-job price before any work starts. Call (877) 492-0146 to book one.
Why does sealing cost more than a basic cleaning?
Sealing is more involved than cleaning – it means locating every reachable leak, cleaning the system first, then sealing joints and seams by hand. That’s why sealing typically runs $350 – $1,800 versus $300 – $600 for cleaning alone, and why doing both together saves you a visit. Call (877) 492-0146 for a combined quote.
If your ducts are leaking, pulling in attic dust, or losing cooled air before it reaches the room, sealing the system is the fix that lasts. We start with air duct cleaning Silver Lake, then repair and seal the leaks the cleaning exposes, and can finish with sanitizing or a filtration upgrade in the same visit. Better air starts with a system that’s been fully cleaned, sealed, and treated – not just blown out.
Call (877) 492-0146 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, and we use professional-grade equipment – Rotobrush, Nikro, and Abatement Technologies containment – so the job is done right the first time, not cleaned around the problem.
Pricing reflects the Silver Lake market as of 2026. Air Duct Cleaning Silver Lake offers free estimates – call (877) 492-0146.
Written by the team at Air Duct Cleaning Silver Lake.
What Our Customers Say
"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Gabriela Vargas"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Todd Meyer"Told me straight that our ducts were in decent shape and didn't need doing every year like the mailer companies claim."
- Claudia Torres