Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Silver Lake Homeowners
Leaky ducts are the quiet reason a Silver Lake home feels dusty no matter how often you clean, and why the upstairs rooms never quite match the temperature of the rest of the house. Gaps at joints, torn flex runs, and failing tape let conditioned air escape into the attic or crawlspace before it ever reaches a register. Our technicians have up to 11 years of experience finding those failures and fixing them at the source. We don’t just clean – we seal, repair, and treat, and we can often schedule same-day service in Silver Lake. Call (877) 492-0146 and we’ll set up a free estimate.
What Our Duct Repair & Sealing Service Includes
Duct repair and sealing is not a single task. It’s a diagnosis followed by targeted fixes throughout the system, and each one has its own method and its own reason for being needed. Here’s what each part of the work covers.
Duct Sealing
Duct sealing closes the gaps, seams, and joint separations that let air escape before it reaches your rooms. You need it when rooms feel under-supplied, when energy bills climb without explanation, or when dust keeps settling on surfaces right after cleaning. We seal the accessible runs of the system, focusing on the connections most likely to leak, and we verify the improvement rather than assuming it.

Flex Duct Repair
Flex duct is the corrugated plastic-and-wire duct common in attic and crawlspace runs. It kinks, sags, tears, and separates at the collar connections, and one crushed section can starve a whole room of airflow. We cut out damaged sections, reconnect them properly, and re-support runs that have lost their hangers so the duct holds its shape.

Metal Duct Repair
Sheet metal duct is durable, but its joints open over time and its seams can separate where the system vibrates. You’ll notice rattling, whistling at registers, or a persistent temperature gap. We rejoin separated sections, re-tape and re-seal seams, and repair crushed or dented runs rather than sealing over the damage.

Duct Insulation
Duct insulation keeps conditioned air at temperature as it travels through an unconditioned attic or crawlspace. When the wrap is torn, missing, or has slipped off, the air that arrives is warmer than the air that left the unit. We replace damaged insulation and wrap uninsulated runs so the supply air makes it to the register intact.
Mastic Sealant
Mastic is a brush-on sealant that bonds to metal and stays flexible through the system’s normal expansion and contraction. Standard cloth or foil tape dries out and peels within a few years, which is why so many leaks start at taped joints. We apply mastic to seams and connections for a lasting seal that doesn’t rely on adhesive backing.
Air Leak Repair
Air leak repair is the umbrella task: finding every significant leak in the accessible system and closing it, whether the leak is at a joint, a boot, a disconnected run, or the air handler connection. You need it when you can feel air moving at a duct connection or when the system can’t keep up with demand. We test the system, locate the failures, and repair them together so the whole system works as one.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
Duct systems are built from many components, and the brands underneath matter when it’s time to repair or upgrade. We work with Rotobrush rotary brush systems, the industry-recognized mechanical standard for residential ductwork, which lets us clean a system properly before a single seam is sealed. Sealing over a dirty duct just traps the contaminants in place, so the cleaning and repair work together. We also use Nikro HVAC cleaning equipment for negative-pressure extraction, and Abatement Technologies containment and filtration to keep dislodged dust out of your living space while we work.
On the air quality side, we integrate Honeywell and Aprilaire products, from filtration to humidity control, and use Guardsman protective products as part of the sanitizing and finishing process. That means the same visit that repairs and seals the system can also upgrade your filtration or add humidity control, without a second appointment. Whether you have a system built with these brands or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
Duct problems announce themselves in patterns, not single events. Watch for these signals and treat any one of them as a reason to have the system looked at.
- Rooms that never reach the thermostat setting. If one room runs warm or cold while the rest of the house is comfortable, the duct feeding it is likely leaking or crushed. No amount of thermostat adjustment fixes a supply run that’s losing its air before it arrives.
- Dust settling within a day of cleaning. Dust pulled in through return-side leaks gets distributed through the whole system and lands on every surface. When you clean and the dust is back the next day, the source is the ducts, not your housekeeping.
- Energy bills that climb without a change in use. When conditioned air escapes into the attic or crawlspace, the system runs longer to reach the same temperature. The utility bill is the first place a duct leak shows up.
- Whistling, rattling, or air you can feel at duct connections. Audible noise at a joint or a register is a leak that’s large enough to hear. Felt air movement at a connection means it’s no longer sealed.
- A musty smell that follows the air. Musty odor that appears when the system runs usually means moisture and dust are meeting inside the ductwork. Sealing the leaks and treating the system stops the cycle at its source.
Our Duct Repair & Sealing Process – Step by Step
Every job follows the same order of operations, because sealing a system before diagnosing it just buries the problem. Here’s how we work, from the first visit to the final check.
- 1
Inspection and diagnosis. We walk the accessible system, check pressure at the registers, and trace where air is being lost. We look at joint separations, disconnected runs, crushed flex, failed tape, and missing insulation, so we’re fixing what’s actually wrong rather than guessing at a symptom.
- 2
Cleaning before repair. We clean the duct system using Rotobrush mechanical agitation and Nikro negative-pressure extraction before we seal anything. Dust and debris trapped under a fresh seal stay there, so the system needs to be cleared first. Abatement Technologies containment keeps that debris out of the rooms you live in while we work.
- 3
Targeted repair and sealing. We fix what the inspection found: reconnecting separated runs, repairing or replacing damaged flex and metal sections, replacing insulation, and sealing joints and seams with mastic. This is where duct repair & sealing actually happens, and where the fixes are matched to the failure rather than applied uniformly.
- 4
Treatment and filtration. Once the system is clean and sealed, we can treat it with Guardsman protective products and, if you want, integrate Honeywell or Aprilaire filtration or humidity control. Sealing a system reduces the leaks that let in unfiltered air, so the treatment and filter work together.
- 5
Final check and photos. We verify that airflow has improved and that every repair is holding, and we show you before-and-after photos of your own system. You see what was fixed, where, and why, before we’re done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Silver Lake?
Duct repair and sealing in Silver Lake typically runs from a few hundred dollars for a targeted sealing of an accessible system to well over a thousand for jobs that involve replacing damaged sections of flex or metal duct, re-insulating runs, and treating the full system. We price one flat rate per system agreed before work starts, so there’s no per-vent pricing and no line item that appears after a technician has started. You know the price before anyone touches a duct.
What affects the total: how many leaks and which type, whether runs are accessible or buried, whether flex needs replacing versus resealing, how much insulation is missing, and how large the system is. To avoid overpaying, insist on the things that matter: one written price per system, a cleaning before any sealing, and before-and-after photos of your ducts so you can confirm the work was actually done. A very low quote usually means it’s a cleaning with no repair, and the leaks you called about will still be there when the invoice is paid. Our estimate is free, and the written estimate sets the final price. Call (877) 492-0146 and we’ll take a look.
Duct Repair & Sealing Near Silver Lake – Our Service Area
We cover Silver Lake and the neighborhoods around it, including Koreatown, Atwater Village, Los Feliz, Glassell Park, Mount Washington, Hollywood, Mid-City, Highland Park, Eagle Rock, El Sereno, and West Hollywood. Whether you’re east toward duct repair & sealing or west toward duct repair & sealing work, we’ll confirm scheduling and dispatch for your address when you call. Air duct cleaning Silver Lake and the surrounding area is what we know best, so if you’re on the edge of our area, just ask.
Serving Silver Lake, CA – Our Local Coverage Area
We serve Silver Lake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Silver Lake
Duct repair and sealing is the process of finding and fixing the gaps, separations, and damaged sections in your duct system, then sealing the joints so conditioned air reaches the rooms it’s meant for. Most Silver Lake homes with central air have leaks that developed slowly, and the signs are usually high bills, uneven rooms, or dust that returns too fast. If you’re seeing any of those, it’s worth having the system looked at. Call (877) 492-0146 for a free estimate.
Most residential duct repair and sealing takes a single day, start to finish, when the work is contained to an accessible system. Jobs with extensive flex replacement, insulation work, or hard-to-reach runs may run a little longer. We’ll tell you the expected timeline in the written estimate so you can plan around it. Call (877) 492-0146 and we’ll schedule you in.
It depends on how many leaks there are, whether flex or metal duct needs replacing, and how much insulation is missing – most jobs fall in the several-hundred-to-low-thousands range. A typical targeted sealing of an accessible system is on the lower end, and full replacement of damaged runs with insulation is on the higher end. We set one flat price per system before work starts, and the written estimate sets the final price. Call (877) 492-0146 for an exact quote – estimates are free.
Yes, we use professional-grade Rotobrush and Nikro equipment for cleaning and extraction, and Abatement Technologies containment to protect your indoor space while we work. We also integrate Honeywell and Aprilaire products if you want filtration or humidity control upgraded at the same time. Whether your system uses those brands or any other make, we can work with it. Call (877) 492-0146 to set up the visit.
Same-day service is often available in Silver Lake – just ask when you call. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday; we’re closed Saturday. If a call comes in outside dispatch hours, we book it into the next opening. Call (877) 492-0146 and we’ll find you a slot.
Every job comes with a written estimate that spells out what’s being repaired and how it’s sealed, and our work is backed by our satisfaction policy – if something we sealed isn’t holding, we’ll come back and make it right. The scope and terms are on the written estimate, so you have it in hand. Call (877) 492-0146 to talk through the details for your system.
No heavy prep is required – just clear access to your registers, the attic or crawlspace access, and the air handler. If pets or small children will be in the home during the work, we’ll use containment to keep dust out of your living areas. Have any filters or system paperwork handy if you can, since it helps us match parts. Call (877) 492-0146 if you have questions before we arrive.
Schedule Your Duct Repair & Sealing Service in Silver Lake Today
If your house is dusty, uneven, or running harder than it should, the duct system is the likely cause, and the fix is a real repair rather than another cleaning. We’ll diagnose the system, clean it with professional-grade equipment, seal the leaks, and show you before-and-after photos. Call (877) 492-0146. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free, no-obligation estimate.
Written by the team at Air Duct Cleaning Silver Lake.